Two Years of Hourly Temperatures 
Tuesday, January 26, 2016, 07:17 AM
Posted by Administrator
I have been collecting hourly temperature readings at my apartment for over 2 years now.

I have a sensor on the east side of the apartment and another sensor on the west side of the apartment.

I have graphed 2 years of recorded temperatures.


view entry ( 2915 views )   |  permalink
Floor mounted ADS-B collinear antenna upgrade 
Tuesday, January 19, 2016, 08:15 AM
Posted by Administrator
I purchased a new PVC pipe, a tee joint and two caps from Bunnings.

After adding additional 114mm sections to my antenna I now have it floor mounted and extending up 7 feet to the ceiling.



No longer need to be concerned about using tape or getting a mounting for the antenna.

I have added logos to the pipe.



See updated details at the bottom of my dump1090 page:
http://vk3nro.com/dump1090/
view entry ( 1845 views )   |  permalink
ADS-B collinear antenna to receive overhead aircraft 
Friday, January 15, 2016, 01:08 AM
Posted by Administrator
I built a collinear antenna using co-axial cable to receive overhead aircraft using a RTL-SDR dongle and a Raspberry Pi 2.

See http://www.vk3nro.com/dump1090/



I followed the instructions in a video posted to rtl-sdr.com
http://www.rtl-sdr.com/homemade-ads-b-collinear-antenna/


view entry ( 1792 views )   |  permalink
RTLSDR Scanner Satellite Dish Examination 
Wednesday, January 13, 2016, 10:55 AM
Posted by Administrator
I have connected my satellite dish to RTL-SDR dongles on my Ubuntu Linux ASUS Nettop PC.

Using the RTLSDR Scanner application I have graphed Frequency Spectrograms of the Optus D2 Ku band, Optus D1 Ku band and Intelsat 19 Ku band.



Details may be found on my ham radio website
http://www.vk3nro.com/RTLSDRScanner/
view entry ( 1866 views )   |  permalink
PowerSwitch Tail II Update 
Wednesday, January 13, 2016, 04:18 AM
Posted by Administrator
I have soldered a custom built breadboard to connect the Raspberry Pi to the PowerSwitch Tail II.

I am using the Wiring Pi pin #1 on this breadboard.



I have updated my web page at the bottom with details of the new breadboard.

See http://rocode.com/powerswitchtail/
view entry ( 1493 views )   |  permalink

<Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next> Last>>